Air Control SMT Feeder Calibration Jig For Fuji Yamaha Samsung Panasonic Juki

Product characteristics:

Feeder calibration jig is a driver that used to confirm the FEEDER interval position (adsorption position) and adjust,it used the CCD camera and high magnification.,Observe feed condition by monitor,
The upper and lower movement of the thimble and the wear of the lever reduce the throwing problem caused by the poor material, It is very helpful to improve the rate.

1.The CCD camera uses the X-Y slider to move the position,And has the function of locking position.

2.CCD cameras and lenses are equipped with shields,To prevent damage to the CCD lens when the feeder is in and out.

3.The bottom plate adopts aluminum material, and the appearance is beautiful.

4.The column is made of aluminum alloy and has high stability.

5.The lens light source adopts annular light source, and the illumination effect is good.

6.The liquid crystal display is fixed on the device body, and the angle can be freely rotated so as to be convenient for observation in different positions.

Product specification: